You can get sub plates that have bottom or side ports. On your manifold models. they are used mainly for multiple assembly type units. You can put more than one single unit on it, with different variants and with any amount needed to do the job. They are solenoid controlled and pilot working units. […]
Sub-Plate Mounted Valves Read More »
When you order parts you will need to do the following: Make sure you know the size, the ports, any options you want on there, need to know if it air, oil or some other type of fluids. And if you order the main valve, see if you need the secondary actutator. And lastly tell
Manual Pilot – Directional Control Valves Read More »
When you order parts you will need to do the following: Make sure you know the size, the ports, any options you want on there, need to know if it air, oil or some other type of fluids. And if you order the main valve, see if you need the secondary actutator. And lastly tell
Manual Pilot – Directional Control Valves Read More »
Sizes on these valves are 1/8″, 1/4″, 3/8″ and 1/2″ If you have a hand, foot or cam they can be interchangeable actuators and they have different combos. There are nine different kinds. Both ends of actuator turn at 90 degrees. The placement of the actuator comes from wherever the primary, so yours could
Manual Valves – Directional Controls Read More »
If you need more information on these types of valves, call us at 662-871-8403 tupelohydraulics@gmail.com
Directional Valve & 2/3/4 Way Valves General Information Read More »