Manual Pilot – Directional Control Valves

You will have six variations for cam, foot, pilot and hand working valves that can be interchangeable actuators letting you have variants on which ever model you choose. And there are nine different kinds of spools to choose from also. The actuators at both ends capable of turning 90 degree intervals. The actuators come in several different combos as well. The main actuator that takes the spool from it’s original point to it’s working place. To make it go back to its original point, you will need to use a second actuator to make that happen. You will need to look on the chart to make sure you order the correct secondary actuator.

When you order parts you will need to do the following:

Make sure you know the size, the ports, any options you want on there, need to know if it air, oil or some other type of fluids. And if you order the main valve, see if you need the secondary actutator. And lastly tell what type of spools you are wanting.

These are used with 1/8, 1/4, 3/8 and 1/2 inch models.

If you need more info on these type of control valves, call us at 662-871-8403

tupelohydraulics@gmail.com

Leave a Comment

Your email address will not be published. Required fields are marked *