Sub-Plate Mounted Valves

  You can get sub plates that have bottom or side ports. On your manifold models. they are used mainly for multiple assembly type units. You can put more than one single unit on it, with different variants and with any amount needed to do the job. They are solenoid controlled and pilot working units. …

Sub-Plate Mounted Valves Read More »

Valves That Are For Hydraulic, Vacuum & Pneumatic Use

    These valves take foot, manifold or subplate mountings. They use a pad of protection for the control of the media that goes in between the spool and valve body to give snappy response time. You will find an oring at both ends of the spool to give extra steadiness. It comes four ported …

Valves That Are For Hydraulic, Vacuum & Pneumatic Use Read More »

Manual Pilot – Directional Control Valves

When you order parts you will need to do the following: Make sure you know the size, the ports, any options you want on there, need to know if it air, oil or some other type of fluids. And if you order the main valve, see if you need the secondary actutator. And lastly tell …

Manual Pilot – Directional Control Valves Read More »

Manual Pilot – Directional Control Valves

When you order parts you will need to do the following: Make sure you know the size, the ports, any options you want on there, need to know if it air, oil or some other type of fluids. And if you order the main valve, see if you need the secondary actutator. And lastly tell …

Manual Pilot – Directional Control Valves Read More »

Manual Valves – Directional Controls

  Sizes on these valves are 1/8″, 1/4″, 3/8″ and 1/2″ If you have a hand, foot or cam they can be interchangeable actuators and they have different combos. There are nine different kinds. Both ends of actuator turn at 90 degrees. The placement of the actuator comes from wherever the primary, so yours could …

Manual Valves – Directional Controls Read More »

Mechanical Valves – Directional Control

Diagrams show different ways to order. These valves are made small so they can fit anywhere and fit on most production type machinery. You can order these in several different styles and have 2,3 and 4 way controls. You can request all this when you order.   Call us at 662-871-8403 tupelohydraulics@gmail.om

Directional Valve & 2/3/4 Way Valves General Information

If you need more information on these types of valves, call us at 662-871-8403 tupelohydraulics@gmail.com

Spool Variety’s and Spool Control

Ordering a gauge – put G Ordering an automatic drain impluse – D and F for float Ordering one with an adustment knob – K Ordering one with bracket mount regulator – B Just make sure you put these letters in your ordering of different options you want. If you happen to use a poly …

Spool Variety’s and Spool Control Read More »

Integral Regulator Filters

Ordering a gauge – put G Ordering an automatic drain impluse – D and F for float Ordering one with an adustment knob – K Ordering one with bracket mount regulator – B Just make sure you put these letters in your ordering of different options you want. If you happen to use a poly …

Integral Regulator Filters Read More »

Filters and Lubricators – Duo Combo

      If you need more info on these filters, regulators and lubricators, call us at 662-871-8403 tupelohydraulics@gmail.com