They are making changes to the 55cc, 75cc and 100cc fixed displacement motor and 55cc/75cc variable displacement motors. Right now it has an indented seat in the endcap. It gave it a more wearable area for the charge pressure relief valve poppet. Now it has been machined to sit right into the surface that it […]
Sundstrand Series 90/100cc – Charge Relief Seat Change Read More »
Marked on both diagrams, it is marked for the larger link pictures that is needed for this unit. Helps in setting the adjustment for the controller. If you need your controller repaired or need a new controller, we can assist you with that. We provide HDC, EDC and MDC controllers. So give us
Sundstrand 24 Series HDC and EDC – Specs Read More »
The tag on your hydraulic/hydrostatic pump or motor tells alot of information needed to help fix your unit,for parts or get a new unit all together. When that tag is torn off or worn off, makes it hard to identify your unit so you can get the correct unit or parts that fit your specific
Sundstrand Sauer Danfoss – Meanings of The Numbers On A Tag For A Pump/Motor Read More »
They want be putting R for right hand or L for left hand on the flange anymore. Instead the pilot surface is what is changing on the covers. The RH rotation will have 1 step and the LH rotation will have 2 steps. The model it affects is the 90-42cc thru 100 cc pumps that
Sundstrand 90 Series 55cc Cage Locator and Auxiliary Flange Charge Pump Cover Read More »
They are making the charge relief valve adjustable in a wide variety of pressure changes that are for 290m 348 and 406 PSI. It also changes the poppet and plug. It may stick out from the pump end cap alittle more than the older model. You will need to put in a gauge to tell
Sundstrand Series 90/55cc Charge Relief Valve Read More »