There are several types of these amplifiers to choose from. The pressure parameters are 100 PSI to 500 PSi. To prevent your unit from runaways, most let the inlet air to stabilize at the outlet before you let unit to cycle. If you need more info […]
convert flange model to foot bracket model you will need FB-B-10 assy 422683 CVP(C)B Compensator This is a right hand rotation (if left hand is need rotate it 180 degrees) Align the compensator, drill thru and put in lockwire thru the seal, next compress seal with the right tool. Black circle = compensator piston
Vickers PVE 19/21 Hydraulic Pump Read More »
Marked on both diagrams, it is marked for the larger link pictures that is needed for this unit. Helps in setting the adjustment for the controller. If you need your controller repaired or need a new controller, we can assist you with that. We provide HDC, EDC and MDC controllers. So give us
Sundstrand 24 Series HDC and EDC – Specs Read More »
On the new models the MDC, the trepan groove has been taken out from the two servo ports on the control. So now you will need washers put into the two servo ports. The washers are put in all the kits now. You will need to put the orings in the servo port outlets. Put
Sundstrand Series 20 Manual Displacement Control Read More »