Rotary Index Tables

Leave a Comment / 4 way valves, AS hydraulic cylinder, ASH hydraulic cylinder, ASL hydraulic cylinder, automatic drains, cessna, cylinder accessories, cylinder check, Cylinder Information, dowty hydraulic pumps and motors, dynapower, eaton, float drains, hall 300 series pumps and motors, hall H1500 Pump, hall series 101, hydraulic valves, impluse drains, M and 4 Series Amplifier Air Driven, motor, Neque, neutral lockout switch, packing, packing or seal kit, parker, racine, radiators, reservoir, rexroth, rotary index table, seal kit, series 25 valves that are base mounted, Series 750 Hall pump/motor, series A heat exchanger, Series B Hydraulic Cylinders, series HSS cylinder, series k heat exchanger, series ss cylinders, small bore size cylinders, sundstrand, sundstrand sauer danfoss, swashplate bearing, tie rod end cylinder, torquemotor, Uncategorized, valve in head cylinder, valve manifold, vane pump, Vane Pump Information, vee packing / By
Model 11 E CCW rotation – This is an example only. It does not give a certain placement of the top plate or anything that helps tightens down the unit.

 

Model 725 CCW rotation – This is an example only. It does not give a certain placement of the top plate or anything that helps tightens down the unit.

 

Model 11 E, EF & F CCW rotation – This is an example only. It does not give a certain placement of the top plate or anything that helps tightens down the unit. * – 3 11/16 : w/16″ or 20″ dia. top plate, ** 3/8 for 16″ to 20″ dia top plate, *** models 11 E adn 11 EF elongated 1 1/2 and drawn back in 1 3/4″

 

Model 725 CW – This is an example only. It does not give a certain placement of the top plate or anything that helps tightens down the unit.

 

Dimensions – these are done on max pressure 80 PSI and weights that are pump 1″
from edge of top plate

 

Options – * usual voltage on one solenoid valve ( you can get other voltages) and **can’t get this in a ccw rotation.

 

Operation

 

 

 

 

 

 

 

 

 

 

 

 

Specs – you can have 2/3 positions by indexing it twice with 4/6 station table. * – That is the max diameters. ** – usual tooling or operate non shock loads up or down base area 3: radius on 725 units and 4: radius on 11 units. Rest of the charts show how to change number of indexes on any series.

 

Most of this deals with pneumatic drive, accuracy, gear & rack construction, index plates, feed pawl, accessory pin and center stud.

If you need more info on this type of rotary index, call us at 662-871-8403

tupelohydraulics@gmail.com

Leave a Comment

Your email address will not be published. Required fields are marked *

For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.