Look on the model code for control data information each model. C and CM Pressure Compensators This means it will intuitively change how the pump will handle pressure at a predetermined time and amount of pressure at the time it is needed. The amount of pressure can go up or down (60 – 90 psi) […]
Vickers PVB/PVB5/PVB10/PVB6/PVB15/PVB29 Control Data Read More »
They have support guides in both tandem mounting kits. The differences in heights for each job, the customer is required to take care of the actual support rods and lock nuts. They need to be put onto the same mounting area as the pump and motor. Needs to be aligned to .003″ to
Racine PSV 80/100 Series Read More »
If you need more info on this unit or any of the Dynapower Models, call us at 800-361-0068 sales@htsrepair.com
Dynapower Cube 9 Generation ll Part ll Read More »
Call us for any of your Dynapower Cube 9 or Goldcup needs at 662-871-8403 or 800-361-0068 sales@tupelohydraulics.com sales@htsrepair.com
Dynapower Cube 9 Generation ll Part 1 Read More »
If you have a question or if you need your unit repaired, call us at 800-361-0068 sales@htsrepair.com
Vickers Intra Vane Double Pump 2520V Read More »
General Information of this pump This tells what each item is on this pump. Will help in ordering parts . If you need further assistance, call us at 662-871-8403 sales@tupelohydraulics.com
PARKER/DENISON HYDRAULIC T6DCC – T6DCC Hydraulic Pump Read More »
Meaning of model code for example HBOL-F2-2/0-lP-6P HBOL = H – high pressure shaft seal used for pressure priming L = L – 5.4 GPM – 3000 PSI Max. M = M – 3.1 GPM – 5000 PSI Max H = H – 1.65 GPM – 10000 PSI Max F2 = seals for Ester Fluid
Racine Model 80 Hydraulic Pump Read More »